Communication KNX BUS
Power supply Via KNX BUS, 29V DC SELV
BUS current absorption 10 mA (with auxiliary power supply)
Auxiliary power supply 230V AC
BUS cable KNX TP1
Command elements 1 miniature button key for programming
physical address
12 push-buttons for local command
1 status push-button
Display elements 1 red LED for programming physical address
12 green LEDs for signalling output status
1 red/green status LED (State)
Implementation elements 12 relays (8AX) with voltage-free NO contact
Max. switching current 8A (AC1)
8AX (140 μF ref. EN 60669-1) fluorescent loads
with maximum surge current 300A (150 μs)
Max. power
for the type of load
Incandescent lamps (230V AC): 1500W
Halogen lamps (230V AC): 1500W
Loads controlled by toroidal transformers: 1200W
Loads controlled by electronic transformers: 1000W
Energy efficient lamps
(compact fluorescent): 25x23W
LED lamps (230Vac): 25x10W
Motors: 800W
Maximum dissipated power 10W
Usage environment Dry indoor places
Operating temperature -5 to +45°C
Storage temperature -25 to +55°C
Relative humidity Max. 93% (non-condensative)
Connection to the BUS Coupling terminal, 2 pins Ø 1mm
Electric connections Extractable screw terminals, max. cable section: 4mm2
Screw terminals, max. cable section: 2.5mm2
Degree of protection IP20
Size 8 DIN modules
Reference Standards Low Voltage Directive 2014/35/EU
Electromagnetic Compatibility Directive
2014/30/EU, EN 50491, EN 60669-2-5
Certifications KNX